Workcell With Cantilever Gantry System And Synchronized Headstock-Tailstock Mobile Single-Axis Positioner

Single axis positioner workstation for cantilever frame head and tail movement.

It is suitable for large workpieces that need to be turned over to achieve automatic welding of all welds.

TIG welding, MIG welding, laser welding and other welding systems can be configured.

The system can be matched with laser tracking system to realize the compensation of workpiece group deviation, and ensure the welding position is accurate even if the workpiece has deviation in group.

The robot is hung upside down on the cantilever frame and can move along X direction to realize weld seam welding of large and long workpieces.

The workpiece is placed on the head-to-tail displacement machine, and after clamping the workpiece, the displacement machine drives the workpiece to turn over, so as to realize the welding of the workpiece weld and ensure that the weld is in the best welding position during welding to ensure the welding quality.

The head and tail of the positioner can be moved to adapt to the welding of workpieces of different lengths.

Applicable workpiece size range: ≤1000*1000* 24000mm (length * width * height).

Robots with different arm spans can be configured according to workpiece requirements.

Due to different workpiece parameters, robot workstation products are non-standard products, which can be customized according to workpiece parameters.